ABB i-bus KNX Product Manual page 96

®
ABB i-bus KNX
Commissioning
94 2CDC507164D0201 | DG/S x.64.1.1
Send interim values on transfers
(e.g. Dim up, scene transfer)
Options: No
Yes
This parameter defines whether the brightness value status is only sent at the end of the brightness
value transition or whether interim values are sent.
•
No: The brightness status is sent on the KNX once the final brightness value has been
reached.
•
Yes: The brightness value status is also sent during a brightness value transition.
Selection of Yes option:
Dependent parameters:
Send interval
Options: 0...2...65,535 s
This parameter defines the send interval for the brightness value status during a brightness
value transition (e.g. dimming up, scene transition).