®
ABB i-bus
KNX
General
The application program has a wide range of functions:
•
Switching, dimming, brightness value setting
•
Status signaling via common or separate group objects
•
Status signaling for a lamp and/or ballast malfunction
•
Programming of individual maximum brightness/minimal dimming values (dimming thresholds)
•
Different dimming speeds for switching, brightness setting and dimming
•
Reaction on DALI and KNX bus voltage failure and recovery
•
Programming of the brightness value (Power-On Level) after a ballast supply voltage recovery
•
KNX control of all connected DALI devices without prior commissioning (DALI group assignment)
•
Triggering of emergency lighting tests via a DALI emergency lighting converter
•
Sending emergency lighting test results on the KNX
Various operating modes, e.g.:
•
A Slave function which integrates the groups in an energy efficient lighting control configuration
•
Light scenes which are recalled or saved via KNX
•
A Staircase lighting function including advance warning
•
A Block and Forced operation function
•
A Partial failure function, so as to switch on other devices to compensate for brightness loss in the
event of a failure
•
DALI QUERY variation so as to optimize interaction with an emergency lighting switch
•
Function test
•
Duration test
•
Partial duration test
•
Battery charge state
DG/S x.64.1.1 | 2CDC507164D0201 7