®
ABB i-bus
KNX
Commissioning
Reset from manual operation to
KNX operation
Options:
These parameters define how and when the system exits manual operation.
•
Via buttons and automatically: You can exit manual mode by pressing
not press
•
Via push button: You can only exit manual mode by pressing
not end manual mode automatically.
This sets the interval after which manual mode automatically ends if no manual operations have been
performed. This interval restarts whenever a manual operation is performed.
Via buttons and automatically
Via push button
, manual mode will end after the parametrized time.
Time for automatic reset
Options:
2...60...255 min
(> 2 sec.< 5 sec.). If you do
(> 2 sec.< 5 sec.). The system does
DG/S x.64.1.1 | 2CDC507164D0201 31