ABB i-bus KNX Product Manual page 95

®
ABB i-bus KNX
Commissioning
Enable Group object
"Status brightness value"
Options:
Linked group object:
The parameter defines how the current status of the DALI output brightness value is sent on the KNX.
•
Yes: The (DALI output x) Status brightness value group object is enabled for the brightness value.
•
No: The brightness value is not actively sent on the KNX.
Yes
No
Selection of Yes option:
Dependent parameters:
Send object value
Options: On change
On request
After a change or on request
•
On change: The status is sent when a change occurs.
•
On request: The status is sent when a request occurs.
•
After a change or on request: The status is sent when either a change or request occurs.
Status brightness value
DG/S x.64.1.1 | 2CDC507164D0201 93