®
ABB i-bus
KNX
Commissioning
3.2.6
X lighting converter parameter window
This window is where the emergency lighting converters are enabled for use on the DALI output. It is also
used to set the emergency lighting properties and tests which affect all the emergency lighting converters
on the output.
•
Automatic emergency lighting test
•
Inhibit/rest mode function
•
Enable emergency lighting converter
Selecting the Yes option under Enable DALI emergency lighting converter (emergency lighting control) in
the A DALI configuration parameter window enables the A lighting converter parameter window.
DG/S x.64.1.1 | 2CDC507164D0201 149