Lighting Converter/Emergency Light Template Parameter Window - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.6.1 X lighting converter/Emergency light template parameter window
This parameter window is enabled if the Enable DALI emergency lighting converter parameter is set to Yes
in the X DALI configuration parameter window.
The template window has a major advantage in that the settings made here relate to all emergency lighting
converters, so each converter on the DALI output reacts in the same way.
The template parameter window is illustrated and described below. It is the same as the individual
parameter window except for the fact that it relate to all emergency lighting converters while the individual
window relates only to a particular converter.
The basic settings for the individual emergency lighting converters and the settings for their tests are made
in this window. In addition, group objects to start the test and feed back the result can be parametrized
with various codes, again by individual converter. These objects are alternatives to the addressed group
objects parametrized in the A lighting converter parameter window. The function is redundant.
DG/S x.64.1.1 | 2CDC507164D0201 155