ABB i-bus KNX Product Manual page 155

®
ABB i-bus KNX
Commissioning
Enable addressed Group objects
"Trigger em lighting test (addr)"
Options:
Linked group object:
•
No: No addressed group object for the output is enabled to start an emergency lighting test.
Regardless of this, a test can be started via the group object for the individual emergency lighting
converters.
•
Yes, KNX DTP_CTC format: This enables an addressed group object for the output which triggers and
stops an emergency lighting test. The coding of the group object corresponds to the KNX DPT
specification for interworking between KNX devices.
•
Yes, DGN/S1.16.1 format: This enables an addressed group object for the output which triggers and
stops an emergency lighting test. The coding for the group object corresponds to the predecessor
device DGN/S 1.16.1. This means that an existing KNX emergency lighting controller that has already
operated with the DGN/S 1.16.1 can still be used, without the need for new decoding.
"Em lighting test status (addr)"
Options:
Linked group object:
•
Yes: The Em lighting test status (addr) addressed group object for the output is enabled. This sends
the status of the emergency lighting test (pending, running, finished) on the KNX.
•
No: The status of the emergency lighting test is not sent on the KNX in an addressed group object for
the output.
The status is sent whenever a change occurs, so no status is lost provided there is a connection between
the emergency lighting converter and the gateway.
On KNX recovery the latest status values are sent if they are different from the previous ones sent.
The last status of the currently selected emergency lighting converter is sent on request.
No
Yes, KNX format DPT_CTC
Yes, DGN/S1.16.1 format
Trigger em lighting test addr (CTC)
Trigger em lighting test addr (DGN/S)
Yes
No
Em lighting test status (addr) (4 byte)
DG/S x.64.1.1 | 2CDC507164D0201 153