ABB i-bus KNX Product Manual page 65

®
ABB i-bus KNX
Commissioning
Enable Group object
"Number of faults statistic"
Options:
Linked group object:
This group object consists of 4 bytes. The individual bytes contain the number of faults for the DALI output
as a whole.
•
Yes: The group object is enabled. This coded 4-byte group object indicates the number of ballast,
lamp and emergency lighting converter faults as well as the error state.
•
No: The group object is not enabled.
Yes
No
Selection of Yes option:
Dependent parameters:
Send object value
Options: On change
On request
After a change or on request
•
On change: The status is sent when a change occurs.
•
On request: The status is sent when a request occurs.
•
After a change or on request: The status is sent when either a change or request occurs.
Number of faults statistic
DG/S x.64.1.1 | 2CDC507164D0201 63