ABB i-bus KNX Product Manual page 50

®
ABB i-bus KNX
Commissioning
Allow switching off via dimming
(output Relative dimming fct)
Options:
This parameter defines the behavior of the output when switching off during dimming.
•
Yes: Switch off using the Dim telegram is allowed.
•
No: Switch off using the Dim telegram is not allowed. The output dims to the minimal dimming value
and stops there. The output must be switched off using the Switch group object, or if allowed, via the
Brightness value group object.
Allow switching OFF via brightness
value (output Brightness value fct)
Options:
This parameter defines the output's behavior when switching off with a brightness value set via the
Brightness value group object.
•
Yes: Switch off using the brightness telegram is allowed.
•
No: Switch off using the brightness telegram is not allowed. The output must be switched off using the
Switch group object, or if allowed, dimmed down.
48 2CDC507164D0201 | DG/S x.64.1.1
Yes
No
Yes
No