®
ABB i-bus
KNX
Commissioning
Enable Group object
"Request status values"
Options:
Linked group object:
All status messages can be requested via this group object provided that they are set to After a change or
on request or On request.
•
Yes: The group object and function are enabled.
•
No: The group object and function are not enabled.
Yes
No
Selection of Yes option:
Dependent parameters:
Request with object value
Options:
0
1
0 or 1
•
0: Sending status messages is requested with the value 0.
•
1: Sending status messages is requested with the value 1.
•
0 or 1: Sending status messages is requested with the values 0 or 1.
Request status values
DG/S x.64.1.1 | 2CDC507164D0201 33