ABB i-bus KNX Product Manual page 55

®
ABB i-bus KNX
Commissioning
Enable Group object
"Output x status byte"
Options:
Linked group object:
This group object sends collective status signals to the output.
•
Yes: The (DALI output X) Status byte group object is enabled. It displays specific DALI output
statuses, which can be helpful e.g. for error diagnostics. For information on which statuses are
displayed, please see the description of the (DALI output x) Status byte group object.
•
No: The group object is not enabled.
Yes
No
Selection of Yes option:
Dependent parameters:
Send object value
Options: On change
On request
After a change or on request
•
On change: The status is sent when a change occurs.
•
On request: The status is sent when a request occurs.
•
After a change or on request: The status is sent when either a change or request occurs.
Output X status byte
DG/S x.64.1.1 | 2CDC507164D0201 53