®
ABB i-bus
KNX
Commissioning
3.2.5.1
X groups/Group x or X ballasts/Ballast x / status parameter window
Settings for the status response of the ballast or group are made in this parameter window.
Users can choose to parametrize the Status function individually by group/ballast or to adopt the
parameters from the Status template.
The individual parameter window (X groups/Group x / status) is the same as the template parameter
window (X template/Status template). Therefore the description below applies to both the template and the
Group x and Ballast x parameter windows.
Parameter settings
Options:
This parameter defines whether the group/ballast settings are taken from the template or individually set.
•
•
The individual parameter windows and parameters are identical to those in the templates, therefore the
individual parameters are not covered separately here – please see X Status template (group x/ballast x)
parameter window, p. 90.
Individual
Apply from template
Individual: The group/ballast is individually parametrized. Corresponding parameters for the
group/ballast are shown. The content of the individual parameters is the same as that in the Status
template parameters.
Apply from template: The group/ballast takes its parameters from the Status template.
DG/S x.64.1.1 | 2CDC507164D0201 139