Odometer Readings; Rs-232 Communication Port; Circuit Board Coil Driver Modules - GE IC3645SR7A353T3 Installation And Operation Manual

BASIC OPERATION AND FEATURES
SX TRANSISTOR CONTROL
and/or disrupted normal vehicle operation. (PMT type
faults are reset by cycling the key switch). These
status codes, along with the corresponding BDI and
hourmeter readings, can be accessed with the
Handset, or by using the RS 232 communications
port and dumping the information to a Personal
Computer terminal.
Section 2.3.2 Odometer Readings
This feature will transmit the miles of use of the
traction control to the Dash Display.
Section 2.3.3 RS 232 Communication Port
This serial communication port can be used with
Interactive Custom Dash Displays to allow changes to
vehicle operating parameters by the operator. Or, it
can be used by service personnel to dump control
operating information and settings into a personal
computer program.
Section 2.3.4 Circuit Board Coil Driver Modules
A Coil driver is internal to the control card, and is the
power device that operate the Line contactor coil. On
command from the control card, these drivers initiate
opening and closing the contactor coils. All driver
modules are equipped with reverse battery protection,
such that, if the battery is connected incorrectly, the
contactors can not be closed electrically.
Page 7
Updated Sept 2019