Views
Layer 3 QoS View
The Layer 3 QoS view displays only Layer 3 QoS objects within Cisco 12000/10720 Router Manager,
such as the following:
•
•
•
You can work within this view to create and configure Access Lists or CAR or WRED objects by
accessing the respective Cisco 12000/10720 Router Manager menus.
Network View
This view displays all network devices within their relevant networks and subnets. The auto-discovery
system of Cisco EMF uses this view to calculate which devices have already been added to the system,
so that it does not try to discover the same device multiple times. For details on auto-discovery, see
Auto Discovery of the Cisco Chassis" section on page
Physical View
Physical view displays all the physical objects. Objects in the Physical view are ordered according to
their relative physical location.
Figure 2-5
GRP
Ethernet
interfaces
VLAN View
The VLAN view displays the VLAN objects in Cisco 12000/10720 Router Manager. The VLAN view
can contain one or more domains. A domain is a user-defined grouping of the VLAN objects. This
grouping may be done on a customer name basis, on logical groupings like 'Accounting Vlans' or it could
Cisco 12000/10700 v3.1.1 Router Manager User Guide
2-12
Access Lists
CAR objects
WRED objects
Hierarchy of Physical View
CiscoGSRChassis
Line
Supporting modules
cards
Physical
interfaces
3-19.
Site
CiscoGSRChassis
Line
GRP
Supporting modules
cards
Ethernet
Physical
interfaces
interfaces
Chapter 2
Cisco 10700 Chassis
GRP
Supporting module
GRP
Ethernet
Physical
interfaces
interfaces
Concepts
"IP
OL-4455-01