Chapter 9 Interface Status; Interfaces And Related Technology-Specific Windows - Cisco 12000 User Manual

Interface Status
This chapter describes how to view status information for each of the interfaces on the Cisco device
being managed using the Cisco 12000/10720 Router Manager application.
This chapter contains the following information:
•
•
•
•
•
•
•
•
•
•

Interfaces and Related Technology-Specific Windows

Interfaces on line cards can support multiple technologies. Status windows are technology-specific. For
example, a DS-3 interface supports two technologies: Generic and DS-3. Therefore, if you wish to view
the status of a DS-3 interface, you must view two windows: the Generic Interface Status window and the
DS-3 Interface Status window.
This process is also applicable to ATM, Ethernet, POS or SRP interfaces. The following table outlines
which technology-specific status windows apply to each interface type.
Table 9-1
Interface Type
DS-3
ATM
Ethernet
POS
OL-4455-01
Interfaces and Related Technology-Specific Windows
Launching the Interface Status Windows
Generic Interface Status
ATM Interface Status
ATM Interface Faults
DS3/E3 Interface Status
SONET Interface Status
SRP Interface Status
SRP Side IPS Status
SRP Topology Map
Interface Types and Status Windows
Technology-Specific Status Window
Generic and DS-3
Generic, ATM and SONET
Generic
Generic and SONET
C H A P T E R
Cisco 12000/10700 v3.1.1 Router Manager User Guide
9
9-1