Link State; Host - Cisco 12000 User Manual

OSPF Status

Link State

The Link State tab displays a single area namely, Lsdb
Lsdb
LSBD LSID—The Link State ID is an LS Type Specific field containing either a Router ID or an IP
Address.
LSDB RouterID—Displays the number that uniquely identifies the originating router in the Autonomous
System.
LSDB Type—The type of the link state advertisement. Each link state type has a separate advertisement
format.
LSDB Area ID—Unique identifier of the Area from which the LSA was received.
LSDB Sequence—Detects the old and duplicate link state advertisements. The larger the sequence
number the more recent is the advertisement.
LSDB Age—Signifies the age of the link state advertisement in seconds.
LSDB Checksum—Displays the checksum of the complete contents of the advertisement, except the age
field.

Host

The Host tab displays a single area namely, Hosts.
Hosts
Host TOS—The Type of Service of the route being configured.
Host IP Address—The IP Address of the Host
Host Metric—The Metric to be advertised.
Host Status—Displays the validity or invalidity of the entry. When this value is set to invalid, it has the
effect of rendering it inoperative.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
14-66
Chapter 14 Routing
OL-4455-01