Deleting An Existing Hsrp Interface Profile; Hsrp Profile Window-Detailed Description; Hsrp Profile Parameters Area - Cisco 12000 User Manual
V3.1.1 router manager
Hide thumbs
Also See for 12000:
- Hardware installation manual (132 pages) ,
- Installation and configuration manual (62 pages) ,
- Software manual (60 pages)
Table of Contents
Advertisement
Chapter 7
Interface Profiles
Deleting an Existing HSRP Interface Profile
To delete an existing HSRP Interface profile, proceed as follows:
Step 1
Choose the Cisco 12000/10720 Manager>Configuration>IP>HSRP Configuration Profile option
from an Ethernet interface object. See
to launch the HSRP Profile window.
Step 2
Choose Edit > Delete Profile. Choose the profile you wish to delete from the list displayed. A Deletion
Prompt window appears (see
Figure 7-7
Click Yes to delete the selected profile or click No to close the window without deleting the profile.
Step 3
When a profile is deleted it disappears from the list of existing profiles displayed in the HSRP Profile
list at the left of the window.
HSRP Profile Window—Detailed Description
The HSRP Profile window displays a single tab: HSRP Profile Parameters
HSRP Profile Parameters Area
The HSRP Profile Parameters area allows you to configure the following information:
Group Number—The group number on the interface for which HSRP is being activated. Standby routers
are grouped and assigned a group number.
Standby Priority—Displays the standby priority for the interface. Standby priority can be set to:
Standby Authentication—Allows you to enable or disable the standby authentication string. Options
available are:
Standby Hello Time [1-255]—Enter the hello interval in seconds (1 to 255). The default time is 3
seconds.
OL-4455-01
Figure
Deletion Prompt Window
Enabled—When the current interface fails it automatically switches to the standby interface.
Disabled—When the current interface fails it does not switch to a standby interface.
Enabled—It will check for the authentication string set and will allow you to configure the interface
on presence of the set string.
Disabled—It will not check for an authentication string.
Table 7-2 on page 7-2
for information on which objects allow you
7-7) for you to confirm that you wish to delete the selected profile.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Creating an HSRP Profile
7-11
Advertisement
Table of Contents
Troubleshooting
