Mpls Forwarding Information Window-Detailed Description; Mpls Forwarding Information Tab - Cisco 12000 User Manual

Chapter 15 MPLS Management
Figure 15-1 MPLS Forwarding Information Window—MPLS Forwarding Information Tab
Choose a Chassis from the list box displayed at the left of the window. The MPLS forwarding
Step 2
information for the selected chassis appears at the right hand side of the window. For further information,
see the
MPLS Forwarding Information Window—Detailed Description
The MPLS Forwarding Information window (see
Information tab.

MPLS Forwarding Information Tab

The MPLS Forwarding Information tab displays a table with the following information:
Local Tag—Local label assigned by the LSR.
Outgoing Interface—Displays information about the outgoing interface to which packets are switched.
Outgoing Tag/VC Tag—Displays information about the label attached to the outgoing packet, which is
learned from the downstream router.
Prefix/Tunnel Id—Displays the IP address of the egress interface or tunnel ID for the incoming packet.
Bytes Switched—Bytes Switched across the LSR.
Next Hop—Displays information about the next hop address.
OL-4455-01
"MPLS Forwarding Information Window—Detailed Description" section on page
Figure 15-1) displays a single MPLS Forwarding
Cisco 12000/10700 v3.1.1 Router Manager User Guide
MPLS Forwarding Information
15-5.
15-5