Configuring A Pos Interface - Cisco 12000 User Manual

POS Interface Configuration
Figure 8-6
Choose a Chassis, Module, and POS Interface from the lists displayed at the left of the window.
Step 2

Configuring a POS Interface

To configure a POS Interface, follow these steps:
Open the POS Interface Configuration window. See
Step 1
section on page 8-15
Choose a Chassis, Module, and POS Interface from the lists displayed at the left of the window.
Step 2
Choose Edit > Apply Profile and then choose the profile you wish to apply from the list displayed (if
Step 3
you are applying a profile). When a profile is applied, the attributes applied from the profile appear in
blue.
Step 4 Configure the parameters displayed in the POS Config tab, as required. See
Configuration Window—Detailed Description" section on page 8-17
Step 5 Click Save to save your configuration changes.
Choose File > Close to close the window.
Step 6
Cisco 12000/10700 v3.1.1 Router Manager User Guide
8-16
POS Interface Configuration Window—POS Config Tab
for further details.
Chapter 8
"Viewing the POS Interface Configuration Window"
"POS Interface
for further details.
Interface Configuration
OL-4455-01