Chapter 11
Layer 3 QoS
IP Standard Tab
The IP Standard tab displays a single IP Standard area:
Figure 11-3 Access List Configuration—IP Standard Tab
IP Standard
The IP Standard area displays five fields:
Access Action—Action to be taken if the conditions are matched. This value will be either deny or
permit.
Host Type—Host type indicates the hosts for which the access action are available. Possible values for
this field include the following:
•
•
•
•
•
Note
Host Name—Name of the host (or source of the packet) for which the access action is applicable.
OL-4455-01
Any—All hosts
Host Name—Specified host name with wild card bits
A.B.C.D—Specified IP address with wild card bits
Host Hostname—Only the specified hostname
Host A.B.C.D—Only the specified IP address
Values are grayed out in the IP Standard area depending upon the Host Type selected.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Access List Configuration
11-13