Vlan Synchronization - Cisco 12000 User Manual

VLAN Synchronization

Table 13-1 Launching the VLAN Windows
Cisco 12000/10720 Router
Manager Window/Task
VLAN Performance
VLAN Configuration
VLAN Synchronization
VLAN Synchronization
VLAN synchronization is provided to synchronize the EM with the VLAN information present in the
network. The synchronization process gets the VLAN information from the devices in the network and
all the previous VLAN information is lost. Once the VLAN synchronization is completed, all the VLAN
objects and the sub-interfaces are deployed under a DefaultDomain. See
page 2-12
Note It is recommended that synchronization should not to be performed at a time when there is heavy load
on the system i.e., when all the chassis are in the performance logging state.
The first time sync is a clean sync which means that the VLAN information from the entire network is
cleaned up and then retrieved.
VLAN synchronization happens only on the chassis which are in the managed state i.e., normal or
performance logging state.
To synchronize the VLAN objects, proceed as follows:
Right click on a domain in the VLAN view and choose Cisco 12000/10720 Manager>
Step 1
Configuration>VLAN Management>Synchronize. The VLAN synchronization dialog can be
launched from the VLAN view or see
you to launch the VLAN Synchronize window.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
13-2
Objects (that can be selected) to Open the
Window
Site Chassis Chassis Module
12000
10720
Series
Yes Yes Yes No
Yes No No No
Yes No No No
for more details on domains.
Menu Options to Select to Open Window
Interface
No Cisco 12000/10720 Manager>Performance>
VLAN Management>Performance
No Cisco 12000/10720 Manager>Configuration>
VLAN Management>Configuration
No Cisco 12000/10720 Manager>Configuration>
VLAN Management>Synchronize
Table 13-1 on page 13-2 for information on which objects allow
Chapter 13 Managing VLANs
"VLAN View" section on
OL-4455-01