Configure Address Family-Detailed Description; Add Address Family - Cisco 12000 User Manual

V3.1.1 router manager

Hide thumbs Also See for 12000:

Table of Contents

Figure 14-19 Configure Address Family Window

Choose the chassis from the Chassis list for which you want to configure the BGP address family.

Edit the fields displayed in the window, as required.

Configure Address Family—Detailed Description

The Configure Address Family window displays a single area: Add/Remove Address Family.

Address Family—Unique identifier of the address family type. The available options are: ipv4 unicast,

ipv4 multicast and vpnv4 unicast.

In Cisco 12000/10720 Router Manager Release 3.1, the ipv4 vrf address family type is not configurable

through the EM.

Neighbor IP Address—Specifies the IP address of the neighbor router for the address family

Remote AS—Specifies the neighbor router's autonomous system number. This value can range from 1

BGP Address Family Configuration

Cisco 12000/10700 v3.1.1 Router Manager User Guide

Troubleshooting

10700 12000/10720