Vpn Status Window-Detailed Description; General Tab - Cisco 12000 User Manual

Chapter 16 MPLS VRF Management
Figure 16-14 VPN Status Window
Choose a Chassis from the list displayed at the left of the window. For further information on the fields
Step 2
displayed in this window, see the
VPN Status Window—Detailed Description
The VPN Status window displays four tabs: General, Routes, Route Targets, and BGP Neighbor.

General Tab

The General tab (see
General
The General area displays the following information:
No. of Configured VRFs—Displays the number of VRFs that are configured on this node.
No. of Connected Interfaces—Displays the total number of interfaces that are connected to the selected
VRF.
No. of Maximum Possible Routes—Displays the maximum number of allowable routes on the device.
No. of Active VRFs—Displays the number of VRFs that are active on this node.
Notification Status—Displays the notification status.
OL-4455-01
"VPN Status Window—Detailed Description" section on page
Figure 16-18) displays a single General area.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
VRF Fault Management
16-21.
16-21