Bgp Status; Viewing The Bgp Status Window - Cisco 12000 User Manual

BGP Status

BGP Status
The BGP Status window displays the BGP configurations existing on the device including basic BGP
information, path information, peer information and redistribution information.
The BGP Status section covers the following:
•
•

Viewing the BGP Status Window

To view the BGP Status window, proceed as follows:
Step 1 Right click on the chassis and choose Fault>BGP>BGP Status. See
information on which objects allow you to launch the BGP Status window. The BGP Detail tab displays
the BGP information.
Figure 14-11 BGP Status Window
Choose a Chassis from the list box displayed on the left side of the window. Choose the Network tab, if
Step 2
required. The Network tab displays the information about paths to destination networks from all the
BGP4 Peers.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
14-18
Viewing the BGP Status Window
BGP Status Window—Detailed Description
Chapter 14 Routing
Table 14-1 on page 14-2 for
OL-4455-01