Cisco 12000 User Manual page 353

Chapter 12 Managing ATM Connections
Figure 12-24 ATM QoS Profiles Management—Profile Tab
Step 2 Choose a Chassis, Module, Interface, and Connections (PVC or SVC) from the list box at the left of
the window. This connection should be the PVC or SVC that you want to apply the ATM QoS profile to.
Any current ATM QoS profiles applied to the selected PVC or SVC appear in the tabs at right.
Step 3 Choose Edit > Apply Profile. A list of ATM QoS profiles appear. Click the named ATM QoS profile
you want to apply. After you apply the profile, a status line appears in the lower left corner of the
window, telling you if the profile was applied successfully or not. The information for the selected new
profile appears in the tabs.
OL-4455-01
Applying an ATM QoS Profile to an ATM Connection
Cisco 12000/10700 v3.1.1 Router Manager User Guide
12-29