Chapter 14
Routing
Adding an OSPF Process
This section explains the procedure to add an OSPF process to the device. To add an OSPF process,
proceed as follows:
Step 1
Open the OSPF configuration window. See
page 14-47
Step 2
Enter an OSPF process id in the Process ID textbox.
Step 3
Click on the Add OSPF Process button. An action report appears.
Figure 14-32 Action Report
Note
OL-4455-01
for further details.
The number of OSPF processes that can be created on a device depends on the number of
interfaces (with IP address) present on the device.
"Viewing the OSPF Configuration Window" section on
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OSPF Configuration
14-49