Cisco 12000 User Manual page 552

Cisco 12000/10720 Router Trap Support
Table 18-2 Monitored Attributes for a GRP Module (continued)
Trap
Fan Normal
Fan Warning
Fan Critical
Fan Shutdown
Fan Not Present
Power Supply Normal
Power Supply Warning
Power Supply Critical
Power Supply Shutdown
Power Supply Not Present
BGP Connection Established
BGP Connection Broken
FlashDeviceChange
Temperature traps include the affected slot in the alarm description.
Note
As can be seen from the table, Cisco EMF alarms may be cleared by other alarms. The general pattern
is that an alarm clears alarms of the same or higher severity. All other alarms should be cleared manually.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
18-4
Alarm Description
Fan Tray 1, normal
Fan Tray 1, warning
Fan Tray 1, critical
Fan Tray 1, shutdown
Fan Tray 1, notPresent
Power Supply 1, normal
Power Supply 1, warning
Power Supply 1, critical
Power Supply 1, shutdown
Power Supply 1, notPresent
BGP Connection Established with Peer
<peer-IP-Address>, Connection is in
<peer-state> State
BGP Connection Broken with Peer
<peer-IP-Address>, Connection is in
<peer-state> State
A Flash Device has been inserted or removed
from the chassis
Chapter 18
Severity Clears
Normal Normal, Critical,
Shutdown, Warning,
NotPresent
Warning Critical, Shutdown,
Warning, NotPresent
Critical Critical, Shutdown,
Warning, NotPresent
Critical Critical, Shutdown,
Warning, NotPresent
Informational Critical, Shutdown,
Warning, NotPresent
Normal Normal, Critical,
Shutdown, Warning,
NotPresent
Warning Critical, Shutdown,
Warning, NotPresent
Critical Critical, Shutdown,
Warning, NotPresent
Critical Critical, Shutdown,
Warning, NotPresent
Informational Critical, Shutdown,
Warning, NotPresent
Normal BGP Connection
Established, BGP
Connection Broken
Major BGP Connection
Broken
Informational FlashDeviceChange
Fault Management
OL-4455-01