Chapter 11
Layer 3 QoS
Figure 11-2 Access List Configuration—General Tab
Step 2
Choose Create Access List. A popup window appears asking you to enter a name for the access list.
Step 3
Enter a name for the access list you are about to create, then choose Ok.
A window appears, confirming if the access list creation was successful or not. The name of your new
access list appears in the list box at the left of the window.
In the General tab, choose the type of access list you want to create. You can also enable logging level
Step 4
at this time (see
Step 5
Modify the configuration fields in the respective tab, as desired (for a detailed description of the fields
within this window, see below).
Step 6
Choose Save to save the changes.
To apply an access list to a CAR policy, see
Step 7
page
11-8.
OL-4455-01
Access List Configuration Window—Detailed
Description).
"Applying an Access List to a CAR Policy" section on
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Access List Configuration
11-11