Enabling/Disabling Traps On The Device - Cisco 12000 User Manual

Chapter 17 MPLS Trap Management

Enabling/Disabling Traps on the Device

To enable or disable MPLS trap generation on a selected chassis, proceed as follows:
Open the MPLS Trap Configuration window. Right click on an appropriate object and select the Cisco
Step 1
12000/10720 Manager> Configuration> Chassis> MPLS> MPLS Trap Configuration option. See
Table 17-2
Table 17-2 Launching the MPLS Trap Configuration Window
Cisco 12000/10720 Router
Manager Window/Task
Enabling/Disabling
Traps on the Device
The MPLS Trap Configuration window appears, with the Traps tab displayed.
Figure 17-1 MPLS Trap Configuration Window—Traps Tab
OL-4455-01
for information on which objects allow you to launch the MPLS Trap Configuration window.
Objects (that can be selected) to Open the Window
Site Chassis Module
12000 10720
Series
Yes Yes Yes No
Menu Options to Select to Open Window
Interface VRF
No No Cisco 12000/10720 Manager>
Configuration> Chassis> MPLS> MPLS
Trap Configuration
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Enabling/Disabling Traps on the Device
17-3