Stop Performance Logging - Cisco 12000 User Manual

VLAN Configuration
Figure 13-22 Action Report Window
Step 4 Choose Close to close the Action Report window.

Stop Performance Logging

You can select multiple VLANs (from the VLAN object selector list) which allows you to stop
Note
performance logging on all the selected VLANs simultaneously. You can choose multiple VLANs in a
list by holding down the Shift key and then selecting the first and last VLAN in the list. You can choose
multiple individual VLANs by holding down the Ctrl key and clicking on the individual VLANs.
To stop performance logging, proceed as follows:
Open the VLAN Configuration window. See
Step 1
page 13-14
Choose a Domain and VLAN from the list boxes displayed at the left of the window.
Step 2
Choose Stop to stop the performance polling on the VLAN. An Action Report window appears
Step 3
confirming that the state of the VLAN object was successfully changed.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
13-18
for further details.
"Viewing the VLAN Configuration Window" section on
Chapter 13 Managing VLANs
OL-4455-01