Changing Column Width - Cisco 12000 User Manual

Chassis Fault Management
Figure 4-13 Chassis Fault Management Window—Fan Tab

Changing Column Width

The Chassis Fault Management window displays four tabs: General, Power Supply, Temperature, and
Fan. The Power Supply, Temperature, and Fan tabs display tables. Text wider than the column width,
displayed in these tables is truncated. Column widths can be altered to allow you to view the details
displayed in the columns more clearly. This section describes how to change the width of a column.
To change the width of a column, proceed as follows:
Move the mouse pointer to the left of a column heading. The mouse pointer changes to a double headed
Step 1
arrow.
Click and hold the left mouse button, a line appears down the length of the column.
Step 2
Drag the line (until the column is at the required width) then release the mouse button.
Step 3
Note
Cisco 12000/10700 v3.1.1 Router Manager User Guide
4-24
Not applicable for Cisco 12000/10720 Router Manager
Columns return to their default width when you close the window.
Chapter 4 Managing Chassis
OL-4455-01