Fault Management for MPLS LDP
Adjacency Type—This adjacency is the result of a "link" hello if the value of this object is link.
Otherwise, it is a result of a "targeted" hello, targeted.
MPLS LDP Peer Status
The LDP Peer refers to a remote LDP entity (that is, a non local LSR). The MPLS LDP Peer Status
window displays information about LDP peers known by the LDP entities on a router.
The MPLS LDP Peer Status section covers the following:
•
•
Viewing the MPLS LDP Peer Status Window
To view the MPLS LDP Peer Status window, proceed as follows:
Right click on an appropriate object and choose Cisco 12000/10720 Manager> Fault> Chassis>
Step 1
MPLS> MPLS LDP Peer Status. See
you to launch the MPLS LDP Peer Status window. The MPLS LDP Peer Status Window appears, with
the Peers tab displayed.
Figure 15-15 MPLS LDP Peer Status Window—Peers Tab
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-28
Viewing the MPLS LDP Peer Status Window
MPLS LDP Peer Status Window—Detailed Description
Table 15-1 on page 15-3
for information on which objects allow
Chapter 15
MPLS Management
OL-4455-01