Fault Management For Mpls Traffic Engineering; Mpls Tunnel Information; Viewing The Mpls Tunnel Information Window - Cisco 12000 User Manual

V3.1.1 router manager

Hide thumbs Also See for 12000:

Table of Contents

MPLS Management

Fault Management for MPLS Traffic Engineering

This section describes Fault Management for MPLS traffic engineering (TE).

The MPLS Tunnel Information window displays the status information about the MPLS tunnels

configured on the managed chassis (Cisco 12000 and 10720 Series Routers). The MPLS Tunnel

Information window uses the MPLS-TE-MIB to populate window. This window can be used to find: the

tunnels that exist on a device, the LSPs that originate or transit this device and whether the MPLS entities

are functionally up or down.

The MPLS Tunnel Information section covers the following:

To view the MPLS Tunnel Information window, proceed as follows:

Right click on an appropriate chassis object and choose Fault> MPLS> MPLS Tunnel Information.

Information window. The MPLS Tunnel Information window appears, with the Select Tunnel tab

Viewing the MPLS Tunnel Information Window

MPLS Tunnel Information Window—Detailed Description

Table 15-1 on page 15-3

for information on which objects allow you to launch the MPLS Tunnel

Fault Management for MPLS Traffic Engineering

Cisco 12000/10700 v3.1.1 Router Manager User Guide

10700 12000/10720