Entering Additional Descriptions For A Selected Chassis - Cisco 12000 User Manual

Chapter 4 Managing Chassis

Entering Additional Descriptions for a Selected Chassis

Entering additional descriptions for a chassis is optional.
Note
To enter additional descriptions for a selected chassis, proceed as follows:
Step 1 Open the Chassis Configuration window.
page 4-7
Figure 4-6
Step 2 Select the relevant Chassis from the list displayed at the left of the window.
Step 3 Choose the Additional Descriptions tab.
Enter additional descriptions into the Descriptions 1 and Descriptions 2 areas, as required.
Step 4
OL-4455-01
for further details.
Chassis Configuration Window—Additional Descriptions Tab
See"Viewing the Chassis Configuration Window" section on
Cisco 12000/10700 v3.1.1 Router Manager User Guide
Chassis Configuration
4-11