Deploying Atm Connection Objects; Deploying A Pvc Object - Cisco 12000 User Manual

Deploying ATM Connection Objects

Deploying ATM Connection Objects
This section describes how to deploy ATM connection objects (that is, PVC and SVC objects).
Table 12-6 Deployment Launch Points
Launch Point to Deploy Object(s) From
Object
Type to be
Deployed Views Site
PVC No No
SVC No No
See
further details on the PVC and SVC connections supported by the Cisco 12000/10720 Router Manager
application.

Deploying a PVC Object

Tip PVC and VCL are interchangeable terms in Cisco 12000/10720 Router Manager.
You can deploy a PVC under a main interface or a subinterface. To deploy a PVC object, proceed as
follows:
Right-click on a selected line card or physical interface, then choose Deployment>Cisco 12000/10720
Step 1
Manager>ATM Connections>PVC. The Deployment Wizard appears.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
12-18
ATM
Chassis Module Interface
Yes Yes Yes
Yes Yes Yes
"ATM Connections Supported by Cisco 12000/10720 Router Manager" section on page 12-2
Menu Options to Launch Deployment Wizard
Deployment>Cisco 12000/10720 Manager>ATM
Connections>PVC
Deployment>Cisco 12000/10720 Manager>ATM
Connections>SVC
Chapter 12 Managing ATM Connections
OL-4455-01
for