Aps Status Window-Detailed Description; Aps Circuits Area; Initiating A Telnet Service - Cisco 12000 User Manual

Initiating a Telnet Service

APS Status Window—Detailed Description
The APS Status window displays a single APS Circuits area.

APS Circuits Area

The APS Circuits area displays a table with the following headings:
Group—Group number of the APS circuit or interface.
Working Slot/Port—Slot/port number of the working interface. For a circuit, if the working interface is
part of another chassis, "remote" is displayed instead of the slot/port number.
Protect Slot/Port—Slot/port number of the protected interface. For a circuit, if the protected interface is
part of another chassis, "remote" is displayed instead of the slot/port number.
Initiating a Telnet Service
The Initiate Telnet Service application allows you to log onto the device, in order to configure or retrieve
information from the device.
To launch a telnet window, proceed as follows:
Right click on the chassis object and select the Technology Specific Tools>Initiate Telnet Service
Step 1
option. See
window. The telnet window appears:
Figure 4-17 Telnet Window
Step 2 Enter the required password (the device may also require a valid user name).
Cisco 12000/10700 v3.1.1 Router Manager User Guide
4-34
Table 4-1 on page 4-2 for information on which objects allow you to launch the telnet
Chapter 4 Managing Chassis
OL-4455-01