Bgp Address Family-Configure Redistribute Protocol-Detailed Description; Add/Remove Redistribution Information; Bgp Address-Family Status; Viewing The Bgp Address-Family Status Window - Cisco 12000 User Manual

Chapter 14 Routing
BGP Address Family-Configure Redistribute Protocol—Detailed Description
The BGP Address Family - Configure Redistribute Protocol window displays a list Address Families and
an area: Add/Remove Redistribution Information.
Address Family—Displays a list of the address families.

Add/Remove Redistribution Information

Address Family—Specifies the address family type.
VRF Name—Identifier of the VRF Name if the address family type is ipv4 vrf
Protocol—This is used to set the protocol whose routes are redistributed by BGP Address Family. The
redistribute configuration causes the corresponding routes to be redistributed into BGP. Valid Protocol
Names that can be redistributed are connected, static, ospf, isis, igrp, eigrp, egp, rip, mobile, odr, dvmrp.
IS-IS Routing Level—This is used to choose the routing level of ISIS Protocol. The values for this field
are: level-1, level-2 or level-1-2 when protocol is 'isis'.
Source ID—This is used to configure the Process ID of the redistributed protocol. A Positive Integer will
indicate the process id of the redistributed protocol; a character string will indicate the ISO routing area
tag. In case of protocols like CONNECTED and STATIC this attribute cannot be configured.
Metric—This is used to configure the metric used for redistributed routes.
You cannot configure a redistribute protocol for vpnv4 address families.
Note
Action
Add Redistribute Entry—Clicking on the Add Redistribute Entry button, adds the redistribution entry to
the BGP Address Family on the device.
Remove Redistribute Entry—Clicking on the "Remove Redistribute Entry" button, removes the
redistribution entry from the BGP Address Family on the device.

BGP Address-Family Status

The BGP Address Family Status window displays the BGP address family configurations existing on the
device including basic BGP address family parameters information, path information, peer information
and redistribution information. The BGP Address-Family Status section covers the following:
•
•

Viewing the BGP Address-Family Status window

To view the BGP Address-Family Status window, proceed as follows:
Step 1 Right click on the chassis and choose Fault>BGP>BGP Address-Family Status. See
page 14-2
window. The AF-General tab displays the BGP address family parameters.
OL-4455-01
Viewing the BGP Address-Family Status window
BGP Address-Family Status Window—Detailed Description
for information on which objects allow you to launch the BGP Address-Family Status
Cisco 12000/10700 v3.1.1 Router Manager User Guide
BGP Address-Family Status
Table 14-1 on
14-41