Deleting An Existing Tofab Policy - Cisco 12000 User Manual

WRED ToFab Configuration
Modify the parameters in the ToFab Configuration tab, as required. See
Step 3
Configuration Window—Detailed Description
Click Save to save the changes.
Step 4

Deleting an Existing ToFab policy

A ToFab policy can be deleted only if it is not currently associated to any line cards. If a policy is
associated to a line card, it cannot be deleted unless it is disassociated from the line card.
To delete an existing ToFab policy, proceed as follows:
Launch the Map Viewer, and choose the Layer3QoSView. Right click on the WRED-MDRR object and
Step 1
choose Cisco 12000/10720 Manager>Configuration>ToFab>ToFab Configuration to launch the
WRED ToFab Configuration window. Refer
that allow you to launch the WRED ToFab Configuration window.
Step 2 Choose the appropriate ToFab policy from the list displayed at the left side of the window.
Step 3 Choose Deployment>Delete Objects. The Deployment Wizard appears with a summary of what will be
deleted.
Figure 11-15 Deployment Wizard—Summary
Cisco 12000/10700 v3.1.1 Router Manager User Guide
11-34
for further details.
Table 11-1 on page 11-2 for information on different objects
Chapter 11 Layer 3 QoS
WRED ToFab Policy
OL-4455-01