Mpls Tunnel Information Window-Detailed Description - Cisco 12000 User Manual

Fault Management for MPLS Traffic Engineering
Figure 15-19 MPLS Tunnel Information Window—Select Tunnel Tab
Step 2 Choose an Chassis from the list displayed at the left of the window. For further information on the fields
displayed in this window, see the
on page
MPLS Tunnel Information Window—Detailed Description
The MPLS Tunnel Information window displays seven tabs: Select Tunnel, Head Tunnel Setup, Head
Tunnel Hops, LSP Setup, LSP Hops, LSP Resource, and Performance.
Select Tunnel Tab
The Select Tunnel tab lists all the head tunnels and LSP tunnels available in the selected managed
chassis. Tunnels are sorted to display head tunnels first and then LSPs. The first tunnel in the list is
automatically selected (by default), and all the other fields are populated for that selected tunnel. The
"Select Tunnel" area information is provided in all the other tabs available in the window as well. When
selecting a tunnel from the tunnel list in the Select Tunnel area in any of the Tabs then the same
information will be updated in all the other Tabs as well.
The Select Tunnel tab (see
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-34
"MPLS Tunnel Information Window—Detailed Description" section
15-34.
Figure 15-19) displays two areas, Select Tunnel and General.
Chapter 15 MPLS Management
OL-4455-01