Viewing The Aps Configuration Window - Cisco 12000 User Manual

Chapter 8 Interface Configuration

Viewing the APS Configuration Window

To view the APS Configuration window, proceed as follows:
Step 1 Right-click on a selected POS line card or POS interface, then choose Cisco 12000/10720
Manager>Configuration>POS>APS Configuration. The APS Configuration window appears:
Figure 8-7
Choose a Chassis, Module, and POS Interface from the lists displayed at the left of the window.
Step 2
The APS Configuration window allows you to:
•
•
•
•
Note
OL-4455-01
APS Configuration Window—APS Tab
Add a working interface
Remove a working interface
Add a protected interface
Remove a protected interface
A working and a protected interface cannot be configured at the same time.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
APS Interface Configuration
8-19