Chapter 5 Managing Modules; Cisco 12000/10720 Router Manager Module Names - Cisco 12000 User Manual

Managing Modules
This chapter describes the management tasks that can be performed on the modules in the
Cisco 12000/10720 Router being managed using the Cisco 12000/10720 Router Manager application.
The following modules can be managed using the Cisco 12000/10720 Router Manager:
•
•
•
This chapter contains the following sections:
•
•
•
•
•
•

Cisco 12000/10720 Router Manager Module Names

The naming convention used in Cisco 12000/10720 Router Manager for line cards, GRPs, CSCs, and
SFCs is an abbreviated form of the type of module, followed by the slot number of the module. For
example, an ATM line card in slot 6 is called A6, and a POS line card in slot 3 is called P3.
Table 5-1
Manager.
Table 5-1
Module
DS-3
POS
ATM
Fast Ethernet
OL-4455-01
GRPs
Line cards—ATM, Ethernet, SRP, POS, DS-3, Fast Ethernet, and Gigabit Ethernet
Supporting modules—CSCs, SFCs, AC or DC power supply modules, fan tray modules, blower
modules, alarm modules and bus board
Cisco 12000/10720 Router Manager Module Names
Launching the Module Management Windows
Module Configuration
Module Fault Management
Module Performance (only available on GRPs)
Module Inventory
identifies each module type and its respective abbreviation in Cisco 12000/10720 Router
Abbreviated Module Names
Cisco 12000/10720 Router Manager
Abbreviation
D
P
A
FE
C H A P T E R
Cisco 12000/10700 v3.1.1 Router Manager User Guide
5
5-1