Associating Vrf Policies - Cisco 12000 User Manual

V3.1.1 router manager

Hide thumbs Also See for 12000:

Table of Contents

MPLS VRF Management

Associating VRF Policies

To associate a the VRF policy with one or more selected interfaces, proceed as follows:

Right click on the chassis object and choose Configuration> Interface> MPLS> VRF Association.

window. The VRF Association window appears, with the VRF tab displayed:

Figure 16-10 VRF Association Window

Choose a Chassis, Module and Interface from the list displayed at the left of the window. For further

information, see the

Choose a VRF from the list of VRF policies in the Available Policies area.

Click the Apply button to associate the selected VRF policy with the selected interface. An Action report

window appears to inform you that the VRF policy has been associated successfully. An error message

appears if the VRF policy is already applied to the interface.

Table 16-1 on page 16-2

for information on which objects allow you to launch the VRF Association

"VRF Association Window—Detailed Description" section on page

Associating a VRF Policy with an Interface

Cisco 12000/10700 v3.1.1 Router Manager User Guide

10700 12000/10720