Deploying An Svc Object - Cisco 12000 User Manual

Deploying ATM Connection Objects

Deploying an SVC Object

To deploy a SVC object on a main interface, proceed as follows:
Step 1 In the Map Viewer, within the Cisco 12000/10720 Router Manager view, right-click on a selected line
card, then choose Deployment>Cisco 12000/10720 Manager>ATM Connections>SVC. The
Deployment Wizard appears.
Figure 12-17
Step 2 Choose a template, either an SVC with a Cisco EMF end point or an SVC with a non-Cisco EMF end
point, and choose either auto named or user named (for details on auto vs. user named, see
Deploying Modules" section on page
Forward. Click Forward to proceed.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
12-22
Deployment Wizard—Templates
3-30). Make sure your selection is highlighted before clicking
Chapter 12 Managing ATM Connections
"Manually
OL-4455-01