Fault Management For Mpls Ldp; Mpls Ldp Entity Status Window; Viewing The Mpls Ldp Entity Status Window - Cisco 12000 User Manual

Fault Management for MPLS LDP

Out Packets—Displays the number of labeled packets that have been transmitted on this interface.
Out Fragments—Displays the number of outgoing MPLS packets that required fragmentation before
transmission on this interface.
Fault Management for MPLS LDP
MPLS is packet forwarding technology that uses a short, fixed length value called "Label" in packets to
determine the next hop for packet transport through an MPLS network by means of label switching
router (LSRs). The label agreement is achieved in an MPLS network by means of procedures defined in
the Label Distribution Protocol (LDP).
This section describes fault management for MPLS Label Distribution Protocol (LDP). This section
describes the following information:
•
•
•

MPLS LDP Entity Status Window

The MPLS LDP Entity Status window displays information related to LDP entities on a selected router.

Viewing the MPLS LDP Entity Status Window

To view the MPLS LDP Entity Status window, proceed as follows:
Step 1 Right click on an appropriate object and choose Cisco 12000/10720 Manager> Fault> Chassis>
MPLS> MPLS LDP Entity Status. See
allow you to launch the LDP Entity Status window. The MPLS LDP Entity Status window appears, with
the Entity tab displayed.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
15-18
MPLS LDP Entity Status Window, page 15-18
MPLS LDP Hello Adjacencies, page 15-26
MPLS LDP Peer Status, page 15-28
Table 15-1 on page 15-3 for information on which objects
Chapter 15 MPLS Management
OL-4455-01