Chapter 8 Interface Configuration; Interfaces And Related Technology-Specific Windows - Cisco 12000 User Manual

Interface Configuration
This chapter describes how to configure or set up the interfaces associated with each line card. You can
configure or set up any interface through the Interface Configuration windows associated with each line
card.
This chapter contains the following information:
•
•
•
•
•
•
•
•
•
•

Interfaces and Related Technology-Specific Windows

Interfaces on line cards can support multiple technologies. Configuration windows are
technology-specific. For example, a POS interface supports three configurable technologies: Generic,
POS, and IP. Therefore, if you want to view or modify the configuration of a POS interface, you might
need to view three windows:
•
•
•
This same process is applicable to all different types of interfaces.
technology-specific configuration windows apply to each interface type.
OL-4455-01
Interfaces and Related Technology-Specific Windows
Launching the Interface Configuration Windows
Generic Interface Configuration
ATM Interface Configuration
Ethernet Interface Configuration
IP Configuration
POS Interface Configuration
APS Interface Configuration
SRP Interface Configuration
SRP Interface Side Configuration
Generic Interface Configuration window
POS Interface Configuration window
IP Interface Configuration window
C H A P T E R
Table 8-1
Cisco 12000/10700 v3.1.1 Router Manager User Guide
8
outlines which
8-1