Unpack and Install the Chassis
Note
•
•
•
•
•
•
Unpack the Chassis
Tip
Ensure that there is sufficient room around the chassis pallet for unpacking. For information about the chassis
dimensions and clearance requirements see, Clearance Requirements.
Carefully move the pallet containing the chassis to the staging area where you plan on unpacking it.
The images in this chapter are only for representation purposes, unless specified otherwise. The chassis' actual
appearance and size may vary.
Unpack the Chassis, on page 27
Install Bottom-Support Rails, on page 29
Transfer Chassis to a Mechanical Lifting Device, on page 30
Mount Chassis Into the Rack, on page 32
Installing a Cable Management Bracket, on page 38
Attach Door Kit to Chassis, on page 39
Ensure that you save the packaging in case you need to return any of the router components. For more
information about returns, see
C H A P T E R
Discrepancies or Damage?, on page
Hardware Installation Guide for Cisco 8600 Series Routers
3
22.
27