Honda CBR650RA Shop Manual page 89

dummyhead dummyhead
ENGINE OIL & FILTER CHANGE
Warm up the engine.
Stop the engine and remove the oil filler cap/dipstick.
Remove the oil drain bolt [1] and sealing washer [2] to
drain the engine oil.
Remove the oil filter cartridge [3] using the special tool.
TOOL:
Oil filter wrench
Check that the oil filter boss protrusion from the
crankcase is specified length as shown.
SPECIFIED LENGTH: 16.5 – 17.5 mm (0.65 – 0.69 in)
• If the oil filter boss is removed, apply locking agent
to the oil filter boss threads and install it (page 1-17).
Apply engine oil to the threads and O-ring of a new oil
filter cartridge [1].
Install the oil filter cartridge and tighten it to the
specified torque.
TOOL:
Oil filter wrench
TORQUE: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Install a new sealing washer [2] onto the drain bolt [3].
Install and tighten the drain bolt/sealing washer to the
specified torque.
TORQUE: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Fill the crankcase with the recommended engine oil
(page 3-10).
ENGINE OIL CAPACITY:
2.3 liters (2.4 US qt, 2.0 Imp qt) at draining
2.6 liters (2.7 US qt, 2.3 Imp qt) at oil filter change
3.0 liters (3.2 US qt, 2.6 Imp qt) at disassembly
Check the oil level (page 3-10).
Make sure there are no oil leaks.
07HAA-PJ70101
07HAA-PJ70101
MAINTENANCE
[2] [1]
16.5 – 17.5 mm
(0.65 – 0.69 in)
[3]
[2]
[3]
[1]
3-11