Honda CBR650RA Shop Manual page 75

dummyhead dummyhead
FRONT LICENSE PLATE STAY
REMOVAL/INSTALLATION
IN model
Remove the following:
– Headlight (page 21-3)
– Socket bolts [1]
– Front license plate stays [2]
– Bolts [3]/nuts [4]/washers [5]
– Collars [6]/mounting rubbers [7]
Installation is in the reverse order of removal.
DRIVE SPROCKET COVER
REMOVAL/INSTALLATION
Remove the following:
– Pinch bolt [1]
– Gearshift arm [2]
– Two bolts [3]
– Drive sprocket cover [4]
Remove the chain guide [5] by releasing the two wire
clips [6].
Installation is in the reverse order of removal.
• Route the wires and hoses into the guide of the
sprocket cover (page 1-22).
• Align the slit in the gearshift arm with the punch
mark on the spindle.
FRAME/BODY PANELS/EXHAUST SYSTEM
[3]/[4]/[5]/[6]/[7]
[1]
[1]
[2]
[4]
[3]
[2]
Align
[5]
[6]
2-15