Honda CBR650RA Shop Manual page 492

dummyhead dummyhead
IMMOBILIZER SYSTEM (HISS)
Disconnect the ECM 33P connector (page 4-76).
Check for continuity between the ECM 33P (Black)
ED, IIED, IIIED,
connector [1] and immobilizer receiver 4P (Black)
IVED, FO, IIFO, KO,
connector [2] terminals of the wire harness side.
IIKO models
TOOL:
Test probe
CONNECTION: Light green/Black – Light green/Black
There should be continuity.
Check for continuity between the ECM 33P (Gray)
MA, IIMA, IN, TH,
connector [1] and immobilizer receiver 4P (Black)
IITH, U, IIU, BR,
connector [2] terminals of the wire harness side.
IIBR models
TOOL:
Test probe
CONNECTION: Light green/Black – Light green/Black
There should be continuity.
Check for continuity between the ECM 33P (Black)
ED, IIED, IIIED,
connector [1] terminal of the wire harness side and
IVED, FO, IIFO,
ground.
KO, IIKO models
TOOL:
Test probe
CONNECTION: Light green/Black – Ground
There should be no continuity.
Check for continuity between the ECM 33P (Gray)
MA, IIMA, IN, TH,
connector [1] terminal of the wire harness side and
IITH, U, IIU, BR,
ground.
IIBR models
TOOL:
Test probe
CONNECTION: Light green/Black – Ground
There should be no continuity.
REMOVAL/INSTALLATION
Refer to page 21-14.
22-16
ED, IIED, IIIED, IVED, FO, IIFO, KO, IIKO models:
[2]
07ZAJ-RDJA110
Lg/Bl
MA, IIMA, IN, TH, IITH, U, IIU, BR, IIBR models:
07ZAJ-RDJA110
[2]
ED, IIED, IIIED, IVED, FO, IIFO, KO, IIKO models:
07ZAJ-RDJA110
MA, IIMA, IN, TH, IITH, U, IIU, BR, IIBR models:
07ZAJ-RDJA110
Lg/Bl
Lg/Bl
Lg/Bl
Lg/Bl
[1]
Lg/Bl
[1]
[1]
[1]