Honda CBR650RA Shop Manual page 305

dummyhead dummyhead
FLYWHEEL
REMOVAL
Remove the left crankcase cover (page 12-3).
Hold the flywheel [1] using the special tool and loosen
the flywheel bolt [2].
• Set the holding block [3] of the flywheel holder [4]
avoiding the flywheel reluctors [5].
• Do not damage the flywheel reluctors.
TOOL:
Flywheel holder
Remove the flywheel bolt and washer [6].
Remove the flywheel [1] using the special tool.
TOOL:
[2] Rotor puller
INSTALLATION
Inspect the woodruff key [1] for scratch, damage,
abnormal wear and deformation.
Replace if necessary.
Clean any oil off from the crankshaft taper area [2].
ED, IIED, IIIED, IVED, FO, IIFO, KO, IIKO models
shown:
07725-0040001
[4]
ED, IIED, IIIED, IVED, FO, IIFO, KO, IIKO models
shown:
07733-0020001
[2]
ALTERNATOR
[1]
[1]
[5]
[2]/[6]
[3]
[2]
[1]
12-5